Inconel 718 powder has good sphericity, fluidity, low melting point, high temperature oxidation resistance, corrosion resistance and wear resistance. Through the different particle size distribution. Nickel based alloy 718 powder can be subdivided into injection molding powder, laser cladding powder, spraying powder, hot isostatic pressing powder and so on.
Chemical Composition(%) of Inconel 718 Powder | |||||||
C | Mn | Si | P | S | Cr | Co | Mo |
≤0.08 | ≤0.35 | ≤0.35 | ≤0.015 | ≤0.015 | 17-21 | ≤1.0 | 2.8-3.3 |
Nb+Ta | Ti | Al | Fe | Cu | Ni | N | |
4.75-5.5 | 0.65-1.15 | 0.2-0.8 | Bal | ≤0.03 | 50-55 | ≤0.006 |
Inconel 718 Powder Properties | |||||
Size Range | 0~25um | 0~45um | 15~45um | 45~105um | 75~180um |
Morphology | Spherical | Spherical | Spherical | Spherical | Spherical |
PSD (Particle Size Distribution) |
D10: 6um | D10: 9um | D10: 14um | D10: 53um | D10: 78um |
D50:16um | D50: 28um | D50: 35um | D50: 69um | D50: 120um | |
D90: 23um | D90: 39um | D90: 45um | D90: 95um | D90: 165um | |
Flow ability | N/A | ≤30S | ≤28S | ≤16S | ≤18S |
Apparent Density | 4.2g/cm3 | 4.5g/cm3 | 4.4g/cm3 | 4.5g/cm3 | 4.4g/cm3 |
Oxygen Content (wt % ) | O: 0.06~0.018wt% , ASTM standard : ≤0.02 wt% | ||||
3D printing Gas Atomized Inconel 718 Powder with the best price | |||||
(low oxygen , high sphericity and good flowability) |
1. HVOF
2. Plasma coating
3. 3D printing
4. powder welding
5. metal injection molding
6. hot isostatic