3D Printing Nickel Based Alloy Inconel 718 Powder
Product Description
Inconel 718 powder has good sphericity, fluidity, low melting point, high temperature oxidation resistance, corrosion resistance and wear resistance. Through the different particle size distribution. Nickel based alloy 718 powder can be subdivided into injection molding powder, laser cladding powder, spraying powder, hot isostatic pressing powder and so on.
Specification
| Chemical Composition(%) of Inconel 718 Powder | |||||||
| C | Mn | Si | P | S | Cr | Co | Mo |
| ≤0.08 | ≤0.35 | ≤0.35 | ≤0.015 | ≤0.015 | 17-21 | ≤1.0 | 2.8-3.3 |
| Nb+Ta | Ti | Al | Fe | Cu | Ni | N | |
| 4.75-5.5 | 0.65-1.15 | 0.2-0.8 | Bal | ≤0.03 | 50-55 | ≤0.006 | |
| Inconel 718 Powder Properties | |||||
| Size Range | 0~25um | 0~45um | 15~45um | 45~105um | 75~180um |
| Morphology | Spherical | Spherical | Spherical | Spherical | Spherical |
| PSD (Particle Size Distribution) |
D10: 6um | D10: 9um | D10: 14um | D10: 53um | D10: 78um |
| D50:16um | D50: 28um | D50: 35um | D50: 69um | D50: 120um | |
| D90: 23um | D90: 39um | D90: 45um | D90: 95um | D90: 165um | |
| Flow ability | N/A | ≤30S | ≤28S | ≤16S | ≤18S |
| Apparent Density | 4.2g/cm3 | 4.5g/cm3 | 4.4g/cm3 | 4.5g/cm3 | 4.4g/cm3 |
| Oxygen Content (wt % ) | O: 0.06~0.018wt% , ASTM standard : ≤0.02 wt% | ||||
| 3D printing Gas Atomized Inconel 718 Powder with the best price | |||||
| (low oxygen , high sphericity and good flowability) | |||||
SEM
Application
1. HVOF
2. Plasma coating
3. 3D printing
4. powder welding
5. metal injection molding
6. hot isostatic
Quality control system
Huarui has strict quality management system. We test our products first after we finish our production, and we test again before every delivery, even sample. And if you need, we would like to accept third party to test. Of course if you like, we could provide sample to you to test.
Our product quality is guaranteed by Sichuan Metallurgical Institute and Guangzhou Institute of Metal Research. The long term cooperation with them can save a lot of testing time for customers.
