Products
-
Copper Alloy Welding Material Copper Phosphorus Alloy Cup14
Copper phosphorus alloy is made of high quality electrolytic copper and red phosphorus by advanced phosphorus pressing process.
-
Ferro Niobium powder FeNb for welding
Ferro niobium is an iron alloy based on niobium, with a niobium content of 60-70%. There are two main properties of ferro niobium.
-
High purity 99.9min Silicon powder
Silicon powder is silver gray or dark gray powder with metallic luster. With the characteristic of high melting point, good heat resistance, high resistivity and high antioxidant effect.
-
HR-F Spherical Aluminum Nitride Powder for Thermal Interface Material
HR-F series spherical aluminum nitride filler is a product obtained through special sphere formation, nitriding purification, classification and other processes. The resulting aluminum nitride has a high spheroidization rate, small specific surface area, narrow particle size distribution and high purity. This product is widely used as a thermal interface material due to its high thermal conductivity, good fluidity and other characteristics.
-
Spherical Alumina Powder for Thermal Interface Materials
HRK series spherical alumina are produced by high temperature melting-jet method developing on ordinary irregular shape Al2O3, and then undergoes screening, purification and other processes to obtain the final product. The obtained alumina has high spheroidization rate, controllable particle size distribution and high purity. Because of its unique properties such as high thermal conductivity and good mobility, The product have been widely used as the filler of thermal interface materials, thermal engineering plastics and aluminum-based Copper-Clad Laminates and so on.
-
Factory supply CuZn alloy powder brass metal powder
Product Description Copper Zinc CuZn Alloy Brass Powder,Brass powder Very fine (200 / 325 mesh), highly pure 70/30 brass powder suitable for a range of applications including resin-casting, decorative coatings and powder metallurgy. And we also have a lot of powders about copper, if you want to know more information, please feel free to contact us. Specification details Main Application Quality control system -
Buy Black Nickel Trioxide Powder Green Nickel Oxide
Product Description There are two kinds of nickel oxide powder, Ni2O3 is gray black powder, and NiO is green powder. The color is different with various nickel – oxygen ratio. It is an inorganic compound and is insoluble in water. It is mainly used as a coloring pigment for ceramics, glass and enamel, and can also be used for the manufacture of nickel powder and the research of magnetic body. Powder advantages 1. The particle size of the powder produced by new process is ... -
Cobalt Base Alloy welding Rods stellite rode prezzo
We have Stellite 1, Stellite 6, Stellite 12, Stellite 21 and many other models.If you have other needs, we can also customize.We can also do sample testing.
-
Vanadium Nitride Vanadium Nitrogen Alloy NITROVAN 12
Vanadium nitride, also known as vanadium nitrogen alloy, is a new alloying additive that can replace ferrovanadium in the production of microalloyed steel.
-
High Purity 999 Battery Grade Li2Co3 Powder Lithium Carbonate Powder
Product Description Lithium carbonate, an inorganic compound with the chemical formula Li2CO3, is a colorless monoclinic crystal or white powder. Slightly soluble in water and dilute acid, insoluble in ethanol and acetone. The thermal stability is lower than that of carbonates of other elements of the same group in the periodic table, and it does not deliquesce in the air. Lithium carbonate powder can be used to make ceramics, medicines, catalysts, etc. It is also a commonly used raw mat... -
Cobalt Oxide Powder Black Co3O4 Powder
Product Description Co3O4 is black or gray-black powder. The bulk density is 0.5-1.5g/cm3, and the tap density is 2.0-3.0g/cm3. Cobalt tetroxide can be slowly dissolved in hot sulfuric acid, but insoluble in water, nitric acid and hydrochloric acid at room temperature. When heated to above 1200 ℃, it will decompose into cobalt oxide. When heated to 900°C in a hydrogen flame, it is reduced to metallic cobalt. Cobalt oxide powder has the characteristics of small particle size, uniform dist... -
Additive Manufacturing Stainless Steel Powder 316l Powder for 3d Printing
Product Description Stainless steel powder is made by water atomization process and has good corrosion resistance and durability. Stainless steel powder has a wide range of industrial uses. Provide a variety of stainless steel metal powder with different particle size. According to usage 1.Hot Isostatic Pressing 2.Metal Injection Moulding 3.3D printing 4.Thermal spraying According to production process 1.Water atomization 2.Water gas combined atomization 3.Gas atomization...
